Thursday, 27 March 2014

Adding KonBoot to Easy2Boot (with UEFI support)

KonBoot is no longer free, but for only $15 it is well worth adding to your Easy2Boot multiboot USB drive.

The latest version 2.5 will work on all Windows systems from XP to Win 10 as long as the user uses a local or online account to login for Win 8/10 (for Win 8/10, KonBoot does not bypass domain or online accounts). The KonBoot manual is here.

Tip: always enter a 'dummy' password - do not leave the password blank when logging in.
If the system is on a Domain, disconnect the Ethernet cable and disable WiFi in the BIOS if it is used.

MBR-booting: For the .img file, simply change the .img file extension to .imgfdhd01

Alternatively, copy the kon-bootFLOPPY\kon-bootFLOPPY.img file to the (say) \_ISO\MAINMENU\MNU folder of your Easy2Boot USB drive and also the FD0-konboot-v2.1.mnu file from the \_ISO\docs\Sample mnu files folder. Then change the title in the .mnu file to suit your version of KonBoot.
Note: Some systems do not show the Kon-Boot multi-colour, ASCII character boot screen (it just hangs with a black screen). The sample .mnu files in E2B v1.91A and later versions contain a special second menu entry with a patch to fix this issue.
You should find that the floppy image will work for all versions of Windows except if the system uses UEFI instead of the BIOS. Most new Windows 8/10 systems will use UEFI booting and contain GPT partitions instead of 'Simple' partitions.

You can use Windows Disk Manager to see if there is an EFI System Partition on your boot disk - if so then your system probably uses UEFI to boot to Windows.

Alternatively, just run MSINFO32 and look for the BIOS Mode  UEFI (or Legacy) entry.

To use KonBoot on a UEFI Windows system, you need to add the KonBoot EFI files to the Easy2Boot USB drive.

The best way to achieve this is to make use of a spare FAT32 USB Flash drive and use the KonBoot script provided to make a new KonBoot flash drive. Then, once the drive has been confirmed as working (there should be a \EFI folder on it and it should UEFI-boot), simply convert it to a FAT32 .imgPTN file and add the file to your Easy2Boot USB drive as follows:

Make a .imgPTN KonBoot image for Macs\UEFI-system and MBR systems

  1. Create a small (any size) single-partition FAT32 USB drive containing KonBoot in the way they suggest. Ensure that the \EFI folder is present on the USB drive for UEFI-booting.
  2. Test it works on a Mac or UEFI system and a normal BIOS system.
  3. Convert the USB flash drive to a FAT32 .imgPTN file using the E2B MPI ToolKit (drag-and-drop the USB drive letter onto the MPI_FAT32 Desktop shortcut).
  4. Copy the .imgPTN file to your E2B drive
  5. Boot it (in MBR mode) and switch to the .imgPTN partition - you can do this loads of ways:
    a. Real BIOS system
    b. Use the QEMU_MENU_TEST.cmd file on the E2B USB drive
    c. RMPrepUSB - QEMU
    d. VirtualBox
    e. MobaLiveCD.exe
    f. Some other VM like VMWare that can boot from a USB drive
    Alternatively, run \_ISO\SWITCH_E2B.exe and select the .imgPTN KonBoot file to switch it in.
  6. You should see the CSM menu when you MBR boot to the E2B USB drive.
  7. Now connect the E2B USB drive to the Mac or UEFI system and see if it boots (hold down left-alt key whilst booting for MAC)
    You can also use it on MBR systems too.
    You may need to disable Secure Boot in the firmware first.
  8. When you have finished, you must return the E2B drive to it's normal E2B state - it can be done in a number of ways:
    a. boot it in a VM\emulator as listed above and choose option 0
    b. Under Windows, run the \e2b\Restore_E2B .cmd file
    c. Run \e2b\SWITCH_E2B.exe under Windows and click on the 'Restore E2B partitions' button.

Booting KonBoot on a UEFI system

To run KonBoot on a UEFI Windows system:
1. Connect the E2B USB drive to the target system - it must be in the CSM mode after having selected the KonBoot .imgPTN file from the E2B menu.
2. Enter the BIOS configuration menu and ensure that Secure Boot is set to Disable
3. Select the E2B USB drive as the boot device but ensure it is listed as a UEFI Boot device
4. KonBoot should load via EFI and then boot to Windows (if the E2B menu loads then you have not booted via UEFI!)
5. If the system reboots before you get to the User login, use the BIOS menu to boot from the E2B USB UEFI drive again - this is sometimes necessary when more than one Windows installation is present on the system.

Alternative UEFI-boot method (not recommended)

An alternative - which may not be successful on all systems is:
  1. The E2B USB drive MUST be formatted as FAT32 and should be the first partition on the drive (first entry in the partition table in the MBR).
  2. Copy the whole EFI folder from the kon-bootUSB folder to the root of your E2B drive so you will have a \EFI folder on your E2B drive.
Note: Some BIOSes will not recognise the disk as UEFI-bootable unless the FAT32 partition is the only partition on the USB drive. Some BIOSes will not UEFI-boot if the FAT32 partition is the 2nd partition on the drive (e.g. NTFS+FAT32). Some BIOSes will not MBR-boot if valid \EFI boot files are present. This means that you will not be able to boot to the E2B or CSM menu on these systems as they only offer you the UEFI boot option!

Using KonBoot UEFI with an Easy2Boot NTFS drive

Note: The instructions below are outdated and deprecated. I recommend you use MakePartImage to make a partition image (.imgPTN file) from a working KonBoot USB Flash drive.

If you want to have an NTFS EasyBoot USB drive and still be able to boot the UEFI version of KonBoot, you need to modify your E2B USB drive so that the first partition is a small (any size) FAT32 partition which holds the EFI KonBoot files.

Note: this may not work for many UEFI systems. Most UEFI systems will only recognise a Simple Volume (MBR) drive if there is only one partition on it which must be FAT32. It is best to use a .imgPTN image file as described above which will work on all systems.

This can easily be done with a 3rd-party utility such as Easeus Partition Master.

Partition 1: FAT32 Primary
    \EFI\boot\  (4 KonBoot .efi files)

Partition 2: NTFS Primary
    \_ISO        (easy2boot files)

Once you have made the FAT32 Primary partition, just copy the KonBoot EFI folder into it. Do NOT copy the KonBoot grldr, menu.lst or any other files to the FAT32 partition.

If the USB drive does not boot to E2B, re-install grub4dos using RMPrepUSB (it is best not to copy the grldr to the FAT32 partition so that the grldr file on the E2B NTFS partition is used instead).

If you are using a USB Removable Flash drive, the 2nd NTFS partition will no longer be accessible to Windows. You can gain access by using CTRL+O in RMPrepUSB to re-order the partitions.

Many UEFI systems may boot from the FAT32 partitition even if the FAT32 partition is the 2nd partition, but you will have more success if you ensure that the FAT32 partition is the first partition on the USB drive. Always use RMPrepUSB CTRL+O to ensure that the FAT32 partition is the first partition before you use it for UEFI KonBoot testing.

Tip: Add the E2B_PTN_SWAP.mnu menu file to your E2B MAINMENU folder and then you can swap over the two partitions from within E2B.

Note: New .imgPTN support in E2B v1.32 allows KonBoot UEFI to work on all (?) systems.

E2B UtilMan and SetHC  hack feature

E2B v1.92+ also contains a useful automated way to use the UtilMan.exe hack for Windows XP-10 which works on all (unencrypted) Windows OS's.